Insignia IS-NXT10232 User Manual (English) - Page 5

NXT Designer shelf system - combined.fm Page 4 Wednesday, July 6, 2005 9:04 AM IS-NXT10232 Designer shelf system Setting up your system System connections Connect the tuner/CD player unit and the amplifier/subwoofer unit with the supplied 9-pin cable. Attach one end of the cable to the "TO SUBWOOFER" jack of the tuner/CD player and attach the other end to the "FROM MAIN" jack of the amplifier/subwoofer. Caution When inserting the DIN cable, the arrows on the ends of the cable must be aligned with the arrows on the units. Misalignment may cause the connectors to fail or damage the 9-pin cable. Auxiliary source connections You can listen to the sound from external audio sources through the speakers of this system. To do this, connect the aux/line/audio output jacks of the external audio source to the AUX IN jack at the back panel of amplifier/subwoofer unit. Note Connection cables are not included. AUDIO OUT LR LINE OUT Speaker connections Connect the two NXT flat panel speakers to the color-coded white "L" and red "R" speaker jacks on the back of the amplifier/subwoofer unit. Make sure that the speaker plugs are fully inserted into the speaker jacks. If the plugs are loose, the connection may be intermittent. AUX IN Examples of external audio sources that can be connected to this system include cassette players, mini disc players, or the sound from your TV, VCR, or DVD player. Instructions for listening to external audio sources will be found later in this manual. Antennas FM Make sure the FM lead wire antenna is unwound and extended to its full length. It may be necessary to vary the direction of this wire antenna until you find the position that provides the best reception for your favorite FM stations. RL AM The AM ferrite bar antenna is inside the tuner/ CD player unit. If AM reception is unsatisfactory, you may have to turn the main unit slightly until you find the position that provides the best reception. 4 www.insignia-products.com