Insignia NS-FDRE80W3 User Manual - Page 15
Exhausting requirements, WARNING, NEVER USE A PLASTIC OR NON-METAL FLEXIBLE DUCT
View all Insignia NS-FDRE80W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
INSTALLATION INSTRUCTIONS 8 Cu. Ft. Electric and Gas Dryers Exhausting requirements WARNING: • Do not exhaust your dryer into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space in a building. • Your dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or closet. WARNING: NEVER USE A PLASTIC OR NON-METAL FLEXIBLE DUCT • If your existing duct work is plastic, non-metal, or combustible, replace it with metal before installing this dryer. • Use only a metal exhaust duct that is non-flammable to ensure containment of the exhaust air heat and lint. • See "Duct requirements" on page 16 for the maximum duct length and number of elbows. • All dryers must be exhausted outside. • Do not assemble the duct with screws or other fasteners that extend into the duct or that catch lint. • The exhaust duct should be 4 in. (10.2 cm) in diameter. • The total length of flexible metal duct should not exceed 7.8 ft. (2.4 m). www.insigniaproducts.com 15