Insignia NS-FDRG80W3 User Manual - Page 28
Y-connector. Make sure that the hose is snug by hand, then tighten another
View all Insignia NS-FDRG80W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
INSTALLATION INSTRUCTIONS 2 Connect the cold water supply hose (not included) from the Y-connector to your washer. Make sure that the hose is snug by hand, then tighten another 2/3 turn with pliers. Cold water supply hose (to washer) 3 Connect the straight end of the short inlet hose to the other outlet on the Y-connector. Make sure that the hose is snug by hand, then tighten another 2/3 turn with pliers. Short inlet hose (to dryer) 4 Connect the short inlet hose's 90° coupling to the brass water inlet on the back of your dryer. Make sure that the hose is snug by hand, then tighten another 2/3 turn with pliers. Water inlet 28 www.insigniaproducts.com
28
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
2
Connect the cold water supply hose (not included) from the Y-connector to
your washer. Make sure that the hose is snug by hand, then tighten another
2/3 turn with pliers.
3
Connect the straight end of the short inlet hose to the other outlet on the
Y-connector. Make sure that the hose is snug by hand, then tighten another
2/3 turn with pliers.
4
Connect the short inlet hose’s 90° coupling to the brass water inlet on the back
of your dryer. Make sure that the hose is snug by hand, then tighten another
2/3 turn with pliers.
Cold water supply hose (to washer)
Short inlet hose (to dryer)
Water inlet