Insignia NS-LDVD19Q-10A User Manual (English) - Page 10

Installing the stand or a wall-mount bracket Installing the stand If you plan to use your TV/DVD combo in an upright position on a flat surface, you need to install the stand. To install the stand: 1 Place a towel or cushion on a flat surface, then lay your TV/DVD combo face-down on the towel or cushion. 2 Find the insert place on the stand. 4 Secure the stand with the four provided screws. Insert place Stand 3 Slide the stand into the insert place. Stand Attaching a wall-mount bracket Warning These instructions are for use by qualified service personnel only. To reduce the risk of damage or injury, do not wall-mount your TV/DVD combo unless you are qualified to do so. To attach a wall-mount bracket: 1 If the stand is installed, remove the four screws that secure the stand to the TV, then remove the stand. 2 Secure the wall-mount bracket (not provided) to the back of your TV/DVD combo using the screws that secured the stand to your TV. These are M4*16 (4 mm diameter and 16 mm screw thread length) screws. 3.937" (100 mm) Location for wall-mount bracket 3.937" (100 mm) 4 www.insigniaproducts.com