Home » Intel Manuals » Motherboards » Intel BOXD865PCDL » Manual Viewer

Intel BOXD865PCDL Product Specification - Page 28

Audio Subsystem

UPC - 735858167413

Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Intel Desktop Board D865PCD Technical Product Specification 1.7.4 Keyboard and Mouse Interface PS/2 keyboard and mouse connectors are located on the back panel. ✏ NOTE The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top PS/2 connector. Power to the computer should be turned off before a keyboard or mouse is connected or disconnected. For information about The location of the keyboard and mouse connectors Refer to Figure 8, page 44 1.8 Audio Subsystem The board provides an audio subsystem based on the Realtek ALC202 codec. 1.8.1 Realtek ALC202-based Audio Subsystem The Realtek ALC202-based audio subsystem consists of the following devices: • Intel 82801EB I/O Controller Hub (ICH5) • Realtek ALC202 audio codec The audio subsystem includes these features: • Signal-to-noise ratio ≥ 90 dB • Supports wake events (driver dependent) • Mic in pre-amp that supports dynamic, condenser, and electret microphones The back panel audio connectors for this audio subsystem including the following: • Line out • Line in • Mic in 1.8.2 Audio Connectors 1.8.2.1 Front Panel Audio Connector A 2 x 5-pin connector provides mic in and line out signals for front panel audio connectors. For information about Refer to The location of the connector Figure 9, page 46 The signal names of the front panel audio connector Table 17, page 47 ✏ NOTE The front panel audio connector is alternately used as a jumper block for routing audio signals. Refer to Section 2.9.1 on page 56 for more information. 28

Section	Page
Intel® Desktop Board D865PCD Technical Product Specification	1
Revision History	2
Preface	3
Intended Audience	3
What This Document Contains	3
Typographical Conventions	3
Contents	5
1 Product Description	11
1.1 Overview	12
1.1.1 Feature Summary	12
1.1.2 Board Layout	13
1.1.3 Block Diagram	14
1.2 Online Support	15
1.3 Design Specifications	16
1.4 Processor	19
1.5 System Memory	20
1.5.1 Memory Configurations	22
1.6 Intel® 865P Chipset	24
1.6.1 Universal 0.8 V / 1.5 V AGP 3.0 Connector	24
1.6.2 USB	25
1.6.3 IDE Support	26
1.6.4 Real-Time Clock, CMOS SRAM, and Battery	26
1.7 I/O Controller	27
1.7.1 Serial Port	27
1.7.2 Parallel Port	27
1.7.3 Diskette Drive Controller	27
1.7.4 Keyboard and Mouse Interface	28
1.8 Audio Subsystem	28
1.8.1 Realtek ALC202-based Audio Subsystem	28
1.8.2 Audio Connectors	28
1.8.3 Audio Subsystem Software	29
1.9 LAN Subsystem	29
1.9.1 Intel® 82562EZ Physical Layer Interface Device	29
1.9.2 RJ-45 LAN Connector with Integrated LEDs	30
1.9.3 LAN Subsystem Software	30
1.10 Chassis Intrusion and Detection	30
1.11 Power Management	30
1.11.1 ACPI	31
1.11.2 Hardware Support	33
2 Technical Reference	37
2.1 Introduction	37
2.2 Memory Map	37
2.3 DMA Channels	38
2.4 Fixed I/O Map	38
2.5 PCI Configuration Space Map	39
2.6 Interrupts	40
2.7 PCI Interrupt Routing Map	41
2.8 Connectors	43
2.8.1 Back Panel Connectors	44
2.8.2 Internal I/O Connectors	45
2.8.3 External I/O Connectors	52
2.9 Jumper Blocks	56
2.9.1 Front Panel Audio Connector/Jumper Block	56
2.9.2 BIOS Setup Configuration Jumper Block	57
2.10 Mechanical Considerations	58
2.10.1 Form Factor	58
2.10.2 I/O Shield	59
2.11 Electrical Considerations	60
2.11.1 DC Loading	60
2.11.2 Add-in Board Considerations	60
2.11.3 Fan Connector Current Capability	60
2.11.4 Power Supply Considerations	61
2.12 Thermal Considerations	61
2.13 Reliability	63
2.14 Environmental	64
2.15 Regulatory Compliance	65
2.15.1 Safety Regulations	65
2.15.2 EMC Regulations	65
2.15.3 European Union Declaration of Conformity Statement	66
2.15.4 Product Ecology Statements	67
2.15.5 Product Certification Markings (Board Level)	67
3 Overview of BIOS Features	69
3.1 Introduction	69
3.2 BIOS Flash Memory Organization	69
3.3 Resource Configuration	70
3.3.1 PCI Autoconfiguration	70
3.3.2 PCI IDE Support	70
3.4 System Management BIOS (SMBIOS)	71
3.5 Legacy USB Support	71
3.6 BIOS Updates	72
3.6.1 Language Support	72
3.6.2 Custom Splash Screen	73
3.7 Recovering BIOS Data	73
3.8 Boot Options	74
3.8.1 CD-ROM Boot	74
3.8.2 Network Boot	74
3.8.3 Booting Without Attached Devices	74
3.8.4 Changing the Default Boot Device During POST	74
3.9 Fast Booting Systems with Intel® Rapid BIOS Boot	75
3.9.1 Peripheral Selection and Configuration	75
3.9.2 Intel Rapid BIOS Boot	75
3.10 BIOS Security Features	76
4 BIOS Setup Program	77
4.1 Introduction	77
4.2 Maintenance Menu	78
4.3 Main Menu	79
4.4 Advanced Menu	80
4.4.1 PCI Configuration Submenu	81
4.4.2 Boot Configuration Submenu	82
4.4.3 Peripheral Configuration Submenu	83
4.4.4 Drive Configuration Submenu	85
4.4.5 Floppy Configuration Submenu	88
4.4.6 Event Log Configuration Submenu	89
4.4.7 Video Configuration Submenu	90
4.4.8 USB Configuration Submenu	91
4.4.9 Chipset Configuration Submenu	92
4.5 Security Menu	94
4.6 Power Menu	95
4.6.1 ACPI Submenu	95
4.7 Boot Menu	96
4.7.1 Boot Device Priority Submenu	97
4.7.2 Hard Disk Drives Submenu	98
4.7.3 Removable Devices Submenu	98
4.7.4 ATAPI CD-ROM Drives Submenu	99
4.8 Exit Menu	99
5 Error Messages and Beep Codes	101
5.1 BIOS Error Messages	101
5.2 Port 80h POST Codes	103
5.3 Bus Initialization Checkpoints	107
5.4 Speaker	108