Intel BOXD865PCDL Product Specification - Page 43
Connectors
![]() |
UPC - 735858167413
View all Intel BOXD865PCDL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Technical Reference 2.8 Connectors CAUTION Only the following connectors have overcurrent protection: back panel USB, front panel USB, and PS/2. The other internal connectors are not overcurrent protected and should connect only to devices inside the computer's chassis, such as fans and internal peripherals. Do not use these connectors to power devices external to the computer's chassis. A fault in the load presented by the external devices could cause damage to the computer, the power cable, and the external devices themselves. This section describes the board's connectors. The connectors can be divided into these groups: • Back panel I/O connectors (see page 44) PS/2 keyboard and mouse USB (four ports) Parallel port Serial port A LAN Audio (line out, line in, and mic in) • Internal I/O connectors (see page 45) Audio (ATAPI CD-ROM and front panel audio) Fans [three] Power Add-in boards (PCI and AGP) Parallel ATA IDE Diskette drive Chassis intrusion • External I/O connectors (see page 52) Front panel USB (two connector for four ports) Auxiliary front panel power/sleep/message-waiting LED Front panel (power/sleep/message-waiting LED, power switch, hard drive activity LED, reset switch, and auxiliary front panel power LED) ✏ NOTE When installing the board in a microATX chassis, make sure that peripheral devices are installed at least 1.5 inches above the main power connector, the diskette drive connector, the Parallel ATA IDE connectors, and the DIMM sockets. 43
![](/manual_guide/products/intel-boxd865pcdl-product-specification-a388705/43.png)