Intel BOXD865PCDL Product Specification - Page 31

Product Description

31



Power Management Event signal (PME#) wake-up support

1.11.1

ACPI

ACPI gives the operating system direct control over the power management and Plug and Play

functions of a computer.

The use of ACPI with the Desktop Board D865PCD requires an

operating system that provides full ACPI support.

ACPI features include:

•

Plug and Play (including bus and device enumeration)

•

Power management control of individual devices, add-in boards (some add-in boards may

require an ACPI-aware driver), video displays, and hard disk drives

•

Methods for achieving less than 15-watt system operation in the power-on/standby

sleeping state

•

A Soft-off feature that enables the operating system to power-off the computer

•

Support for multiple wake-up events (see Table 9 on page 32)

•

Support for a front panel power and sleep mode switch

Table 7 lists the system states based on how long the power switch is pressed, depending on how

ACPI is configured with an ACPI-aware operating system.

Table 7.

Effects of Pressing the Power Switch

If the system is in this state

…

…

and the power switch is

pressed for

…

the system enters this state

Off

(ACPI G2/G5

–

Soft off)

Less than four seconds

Power-on

(ACPI G0

–

working state)

On

(ACPI G0

–

working state)


Soft-off/Standby

(ACPI G1

–

sleeping state)

On

(ACPI G0

–

working state)

More than four seconds

Fail safe power-off

(ACPI G2/G5

–

Soft off)

Sleep

(ACPI G1

–

sleeping state)


Wake-up

(ACPI G0

–

working state)

Sleep

(ACPI G1

–

sleeping state)

More than four seconds

Power-off

(ACPI G2/G5

–

Soft off)

For information about

Refer to

The Desktop Boards

’

compliance level with ACPI

Section 1.3, page 16

1.11.1.1

System States and Power States

Under ACPI, the operating system directs all system and device power state transitions.

The

operating system puts devices in and out of low-power states based on user preferences and

knowledge of how devices are being used by applications.

Devices that are not being used can be

turned off.

The operating system uses information from applications and user settings to put the

system as a whole into a low-power state.

Table 8 lists the power states supported by the Desktop Board D865PCD and along with the

associated system power targets.

See the ACPI specification for a complete description of the

various system and power states.

Section	Page
Intel® Desktop Board D865PCD Technical Product Specification	1
Revision History	2
Preface	3
Intended Audience	3
What This Document Contains	3
Typographical Conventions	3
Contents	5
1 Product Description	11
1.1 Overview	12
1.1.1 Feature Summary	12
1.1.2 Board Layout	13
1.1.3 Block Diagram	14
1.2 Online Support	15
1.3 Design Specifications	16
1.4 Processor	19
1.5 System Memory	20
1.5.1 Memory Configurations	22
1.6 Intel® 865P Chipset	24
1.6.1 Universal 0.8 V / 1.5 V AGP 3.0 Connector	24
1.6.2 USB	25
1.6.3 IDE Support	26
1.6.4 Real-Time Clock, CMOS SRAM, and Battery	26
1.7 I/O Controller	27
1.7.1 Serial Port	27
1.7.2 Parallel Port	27
1.7.3 Diskette Drive Controller	27
1.7.4 Keyboard and Mouse Interface	28
1.8 Audio Subsystem	28
1.8.1 Realtek ALC202-based Audio Subsystem	28
1.8.2 Audio Connectors	28
1.8.3 Audio Subsystem Software	29
1.9 LAN Subsystem	29
1.9.1 Intel® 82562EZ Physical Layer Interface Device	29
1.9.2 RJ-45 LAN Connector with Integrated LEDs	30
1.9.3 LAN Subsystem Software	30
1.10 Chassis Intrusion and Detection	30
1.11 Power Management	30
1.11.1 ACPI	31
1.11.2 Hardware Support	33
2 Technical Reference	37
2.1 Introduction	37
2.2 Memory Map	37
2.3 DMA Channels	38
2.4 Fixed I/O Map	38
2.5 PCI Configuration Space Map	39
2.6 Interrupts	40
2.7 PCI Interrupt Routing Map	41
2.8 Connectors	43
2.8.1 Back Panel Connectors	44
2.8.2 Internal I/O Connectors	45
2.8.3 External I/O Connectors	52
2.9 Jumper Blocks	56
2.9.1 Front Panel Audio Connector/Jumper Block	56
2.9.2 BIOS Setup Configuration Jumper Block	57
2.10 Mechanical Considerations	58
2.10.1 Form Factor	58
2.10.2 I/O Shield	59
2.11 Electrical Considerations	60
2.11.1 DC Loading	60
2.11.2 Add-in Board Considerations	60
2.11.3 Fan Connector Current Capability	60
2.11.4 Power Supply Considerations	61
2.12 Thermal Considerations	61
2.13 Reliability	63
2.14 Environmental	64
2.15 Regulatory Compliance	65
2.15.1 Safety Regulations	65
2.15.2 EMC Regulations	65
2.15.3 European Union Declaration of Conformity Statement	66
2.15.4 Product Ecology Statements	67
2.15.5 Product Certification Markings (Board Level)	67
3 Overview of BIOS Features	69
3.1 Introduction	69
3.2 BIOS Flash Memory Organization	69
3.3 Resource Configuration	70
3.3.1 PCI Autoconfiguration	70
3.3.2 PCI IDE Support	70
3.4 System Management BIOS (SMBIOS)	71
3.5 Legacy USB Support	71
3.6 BIOS Updates	72
3.6.1 Language Support	72
3.6.2 Custom Splash Screen	73
3.7 Recovering BIOS Data	73
3.8 Boot Options	74
3.8.1 CD-ROM Boot	74
3.8.2 Network Boot	74
3.8.3 Booting Without Attached Devices	74
3.8.4 Changing the Default Boot Device During POST	74
3.9 Fast Booting Systems with Intel® Rapid BIOS Boot	75
3.9.1 Peripheral Selection and Configuration	75
3.9.2 Intel Rapid BIOS Boot	75
3.10 BIOS Security Features	76
4 BIOS Setup Program	77
4.1 Introduction	77
4.2 Maintenance Menu	78
4.3 Main Menu	79
4.4 Advanced Menu	80
4.4.1 PCI Configuration Submenu	81
4.4.2 Boot Configuration Submenu	82
4.4.3 Peripheral Configuration Submenu	83
4.4.4 Drive Configuration Submenu	85
4.4.5 Floppy Configuration Submenu	88
4.4.6 Event Log Configuration Submenu	89
4.4.7 Video Configuration Submenu	90
4.4.8 USB Configuration Submenu	91
4.4.9 Chipset Configuration Submenu	92
4.5 Security Menu	94
4.6 Power Menu	95
4.6.1 ACPI Submenu	95
4.7 Boot Menu	96
4.7.1 Boot Device Priority Submenu	97
4.7.2 Hard Disk Drives Submenu	98
4.7.3 Removable Devices Submenu	98
4.7.4 ATAPI CD-ROM Drives Submenu	99
4.8 Exit Menu	99
5 Error Messages and Beep Codes	101
5.1 BIOS Error Messages	101
5.2 Port 80h POST Codes	103
5.3 Bus Initialization Checkpoints	107
5.4 Speaker	108

Intel BOXD865PCDL Product Specification - Page 31

System States and Power States

Page 31 highlights