Intel D848PMB Product Guide - Page 40
Connecting the Chassis Intrusion Cable, Connecting Fans, Connecting Power Cables
View all Intel D848PMB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Intel Desktop Board D848PMB Product Guide Connecting the Chassis Intrusion Cable Connect the chassis intrusion cable to the header shown in Figure 13. Connecting Fans Connect the processor's fan heat sink cable to the processor fan header on the board. Connect chassis fan cables to the board fan headers. See Figure 13 for fan header locations. Connecting Power Cables CAUTION Failure to use an ATX12V power supply, or not connecting the 12 V processor core voltage power supply connector to the desktop board may result in damage to the desktop board and/or power supply. Figure 13 shows the location of power connectors. 1. Observe the precautions in "Before You Begin" on page 23. 2. Connect the 12 V processor core voltage power supply cable to the 2x2 connector. 3. Connect the main power cable to the 2x10 connector. 40