Intel D848PMB Product Guide - Page 67
Table 25., Chipset Configuration Submenu, Using the BIOS Setup Program, Feature, Options, Description
View all Intel D848PMB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Using the BIOS Setup Program Table 25. Chipset Configuration Submenu (continued) Feature Extended Configuration Graphics Core Frequency SDRAM Frequency SDRAM Timing Control Options • Default (default) • User Defined • Auto (default) • 266 MHz • 333-320 MHz • Auto (default) • 266 MHz • 333 MHz • 400 MHz • Auto (default) • Manual - Aggressive • Manual - User Defined CPC Override • Auto (default) • Enabled • Disabled SDRAM RAS Act. To Pre. • 8 (default) • 7 • 6 • 5 SDRAM CAS# Latency • 2.0 • 2.5 • 3.0 (default) SDRAM RAS# to CAS# delay • 4 • 3 (default) • 2 SDRAM RAS# Precharge • 4 • 3 (default) • 2 Description Chooses the default or user defined settings for the extended configuration options. Allows override of detected graphics core frequency value. Allows override of detected memory frequency value. Auto allows timings to be programmed according to the memory detected. Manual - Aggressive selects the most aggressive user defined timings. Manual - User Defined allows manual override of detected SDRAM settings. Controls Command Per Clock/1n rule mode. When enabled, allows DRAM controller to attempt Chip Select assertions in two consecutive common clocks. Selects length of time from read to pre-change. Corresponds to tRAS, min. Selects the number of clock cycles required to address a column in memory. Corresponds to CL. Selects the number of clock cycles between addressing a row and addressing a column. Corresponds to tRCD. Selects the length of time required before accessing a new row. 67