Intel D848PMB Product Guide - Page 61
Table 19., SATA and PATA Submenus, Using the BIOS Setup Program, Feature, Options, Description
View all Intel D848PMB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Using the BIOS Setup Program Table 19. SATA and PATA Submenus (continued) Feature DMA Mode S.M.A.R.T. Cable Detected (Note) Options • Auto (default) • SWDMA 0 • SWDMA 1 • SWDMA 2 • MWDMA 0 • MWDMA 1 • MWDMA 2 • UDMA 0 • UDMA 1 • UDMA 2 • UDMA 3 • UDMA 4 • UDMA 5 • Auto (default) • Disable • Enable None Description Specifies the Ultra DMA mode for the drive. Self-monitoring analysis and reporting technology. Displays the type of cable connected to the IDE interface: 40-conductor or 80-conductor (for ATA-66/100 devices) or Serial ATA. Note: These configuration options appear only if an IDE device is installed. 61
Using the BIOS Setup Program
Table 19.
SATA and PATA Submenus
(continued)
Feature
Options
Description
DMA Mode
•
Auto (default)
•
SWDMA 0
•
SWDMA 1
•
SWDMA 2
•
MWDMA 0
•
MWDMA 1
•
MWDMA 2
•
UDMA 0
•
UDMA 1
•
UDMA 2
•
UDMA 3
•
UDMA 4
•
UDMA 5
Specifies the Ultra DMA mode for the drive.
S.M.A.R.T.
•
Auto (default)
•
Disable
•
Enable
Self-monitoring analysis and reporting technology.
Cable Detected
(Note)
None
Displays the type of cable connected to the IDE interface:
40-conductor or 80-conductor (for ATA-66/100 devices) or
Serial ATA.
Note:
These configuration options appear only if an IDE device is installed.
61