Intel D865GRH D865GRH_ProductGuide01_English. - Page 30
Installing and Removing a Processor, Installing a Processor, Installing the Processor Fan Heat Sink
View all Intel D865GRH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Intel Desktop Boards D865GRH Product Guide Installing and Removing a Processor Instructions on how to install the processor to the desktop board are given below. Installing a Processor CAUTION Before installing or removing the processor, make sure that AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 2 on page 22). Failure to do so could damage the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 25. 2. Locate the processor socket and raise the socket lever completely. 3. Install the processor so that the corner with the triangle marking (A) is aligned with the corner where the lever is attached to the socket (see Figure 5). 4. Lower the lever to its original position. mPGA478B mPGA478B mPGA478B A Figure 5. Installing a Processor OM15028 Installing the Processor Fan Heat Sink Desktop Board D865GRH has an integrated processor fan heat sink retention mechanism (RM). For instructions on how to install the processor fan heat sink to the integrated processor fan heat sink RM, refer to the boxed processor manual or the Intel World Wide Web site at: http://support.intel.com/support/processors/pentium4/intnotes478.htm 30