Intel D875PBZ Product Guide - Page 47
Connecting Hardware Control Cables, Connecting Power Cables
View all Intel D875PBZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installing and Replacing Desktop Board Components Connecting Hardware Control Cables Observe the precautions in "Before You Begin" on page 27. Connect the processor's fan heat sink cable to the processor fan header on the board. Connect chassis fan cables to the board fan headers. Connect the chassis intrusion cable to its respective header on the board. See Figure 14 for header locations. Connecting Power Cables CAUTION Failure to use an ATX12V power supply, or not connecting the 12 V processor core voltage power supply connector to the desktop board may result in damage to the desktop board and/or power supply. Figure 14 shows the location of the power connectors. 1. Observe the precautions in "Before You Begin" on page 27. 2. Connect the 12 V processor core voltage power supply cable to the 2x2 connector. 3. Connect the main power supply cable to the 2x10 connector. 47