Intel D915GMH English Manual Product Guide - Page 15
Main Memory - specs
View all Intel D915GMH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Desktop Board Features Main Memory NOTE To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation. Desktop board D915GMH supports dual or single channel memory configurations defined in Table 4. Table 4. Desktop Board D915GMH Memory Configurations Memory Speed DDR 400 Processor Pentium 4 processor DDR 333 Pentium 4 processor FSB frequency (MHz) 800 533 800 533 Memory Speed Outcome (MHz) 400 400 333 333 Desktop board D915GMH supports: • Four 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory Module (DIMMs) connectors with gold-plated contacts • Unbuffered, non-registered single or double-sided DIMMs • Serial Presence Detect (SPD) memory only • Non-ECC RAM • 2.5 V memory • Memory configuration listed below: Up to 1.0 GB utilizing 128 Mb technology Up to 2.0 GB utilizing 256 Mb technology Up to 4.0 GB utilizing 512 Mb and 1 GB technology NOTE System resources (such as PCI and PCI Express) require physical memory address locations that reduce available memory addresses above 3 GB. This may result in less than 4 GB of memory being available to the operating system and applications. Related Links: Go to the following links or pages for more information about: • The latest list of tested memory, http://support.intel.com/support/motherboards/desktop/ • SDRAM specifications, http://www.intel.com/technology/memory/pcsdram/spec/ • Installing memory, page 34 in Chapter 2 15