Intel D915GMH English Manual Product Guide - Page 50

Setting the BIOS Configuration Jumper Block - bios update

Page 50 highlights

Intel Desktop Board D915GMH Product Guide Setting the BIOS Configuration Jumper Block CAUTION Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 25 shows the location of the desktop board's BIOS configuration jumper. 3 1 OM17186 Figure 25. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in BIOS setup. Table 11 shows the jumper settings for the setup program modes. Table 11. Jumper Settings for the BIOS Setup Program Modes Jumper Setting 3 Mode Normal (default) (1-2) Description The BIOS uses the current configuration and passwords for booting. 1 Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS 3 displays the Maintenance Menu. Use this menu to clear passwords. 1 Recovery (None) The BIOS recovers data from a recovery diskette in the 3 event of a failed BIOS update. 1 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Intel Desktop Board D915GMH Product Guide
50
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer before changing the
jumper.
Moving the jumper with the power on may result in unreliable computer operation.
Figure 25 shows the location of the desktop board’s BIOS configuration jumper.
OM17186
1
3
Figure 25.
Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS setup.
Table
11 shows the jumper settings for the setup program modes.
Table 11.
Jumper Settings for the BIOS Setup Program Modes
Jumper Setting
Mode
Description
3
1
Normal (default) (1-2)
The BIOS uses the current configuration and passwords for
booting.
3
1
Configure (2-3)
After the Power-On Self-Test (POST) runs, the BIOS
displays the Maintenance Menu.
Use this menu to clear
passwords.
3
1
Recovery (None)
The BIOS recovers data from a recovery diskette in the
event of a failed BIOS update.