Intel D945GCCR Product Specification - Page 23

Advanced Digital Display ADD2/ADD2+ Card Support, 5.1.4, Configuration Modes - driver download

Get Intel D945GCCR PDF manuals and user guides View all Intel D945GCCR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Product Description 1.5.1.3 Advanced Digital Display (ADD2/ADD2+) Card Support The GMCH routes two multiplexed DVO ports that are each capable of driving up to a 200 MHz pixel clock to the PCI Express x16 connector. The DVO ports can be paired for a dual channel configuration to support up to a 400 MHz pixel clock. When an ADD2/ADD2+ card is detected, the Intel GMA950 graphics controller is enabled and the PCI Express x16 connector is configured for DVO mode. DVO mode enables the DVO ports to be accessed by the ADD2/ADD2+ card. An ADD2/ADD2+ card can either be configured to support simultaneous display with the primary VGA display or can be configured to support dual independent display as an extended desktop configuration with different color depths and resolutions. ADD2/ADD2+ cards can be designed to support the following configurations: • TV-Out (composite video) • Transition Minimized Differential Signaling (TMDS) for DVI 1.0 • Low Voltage Differential Signaling (LVDS) • Single device operating in dual channel mode • VGA output • HDTV output 1.5.1.4 Configuration Modes A list of supported modes for the Intel GMA950 graphics controller is available as a downloadable document. For information about Supported video modes for the board Refer to Section 1.2, page 15 1.5.2 USB The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. The ICH7 provides the USB controller for all ports. The port arrangement is as follows: • Four ports are implemented with dual stacked back panel connectors • Four ports are routed to two separate front panel USB headers NOTE Computer systems that have an unshielded cable attached to a USB port may not meet FCC Class B requirements, even if no device is attached to the cable. Use shielded cable that meets the requirements for full-speed devices. For information about The location of the USB connectors on the back panel The location of the front panel USB headers Refer to Figure 12, page 49 Figure 13, page 50 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Product Description
23
1.5.1.3
Advanced Digital Display (ADD2/ADD2+) Card Support
The GMCH routes two multiplexed DVO ports that are each capable of driving up to a
200 MHz pixel clock to the PCI Express x16 connector.
The DVO ports can be paired
for a dual channel configuration to support up to a 400 MHz pixel clock.
When an
ADD2/ADD2+ card is detected, the Intel GMA950 graphics controller is enabled and
the PCI Express x16 connector is configured for DVO mode.
DVO mode enables the
DVO ports to be accessed by the ADD2/ADD2+ card.
An ADD2/ADD2+ card can
either be configured to support simultaneous display with the primary VGA display or
can be configured to support dual independent display as an extended desktop
configuration with different color depths and resolutions.
ADD2/ADD2+ cards can be
designed to support the following configurations:
•
TV-Out (composite video)
•
Transition Minimized Differential Signaling (TMDS) for DVI 1.0
•
Low Voltage Differential Signaling (LVDS)
•
Single device operating in dual channel mode
•
VGA output
•
HDTV output
1.5.1.4
Configuration Modes
A list of supported modes for the Intel GMA950 graphics controller is available as a
downloadable document.
For information about
Refer to
Supported video modes for the board
Section 1.2, page 15
1.5.2
USB
The board supports up to eight USB 2.0 ports, supports UHCI and EHCI, and uses
UHCI- and EHCI-compatible drivers.
The ICH7 provides the USB controller for all ports.
The port arrangement is as
follows:
•
Four ports are implemented with dual stacked back panel connectors
•
Four ports are routed to two separate front panel USB headers
±
NOTE
Computer systems that have an unshielded cable attached to a USB port may not
meet FCC Class B requirements, even if no device is attached to the cable.
Use
shielded cable that meets the requirements for full-speed devices.
For information about
Refer to
The location of the USB connectors on the back panel
Figure 12, page 49
The location of the front panel USB headers
Figure 13, page 50