Intel DH61HO Technical Product Specification - Page 21

Audio Subsystem - driver

Get Intel DH61HO PDF manuals and user guides View all Intel DH61HO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Product Description 1.9.1 Serial Port The serial port is implemented as a 10-pin header on the board. The serial port supports data transfers at speeds up to 115.2 kbits/s with BIOS support. For information about The location of the serial port header Refer to Figure 9, page 39 1.10 Audio Subsystem The board supports Intel High Definition Audio through the Realtek ALC662 audio codec interface. The Realtek ALC662-based audio subsystem supports the following features: • 6+2-channel audio with independent multi-streaming stereo. • Advanced jack sense for the back panel audio jacks that enables the audio codec to recognize the device that is connected to an audio port. The back panel audio jacks are capable of retasking according to the user's definition, or can be automatically switched depending on the recognized device type. • Stereo input and output through back panel jacks • Headphone and Mic in functions for front panel audio jacks • A signal-to-noise (S/N) ratio of 90 dB Table 5 lists the supported functions of the front panel and back panel audio jacks. Table 5. Audio Jack Support Audio Jack FP Green FP Pink Rear Blue Rear Green Rear Pink Microphone Default Headphones Default Ctrl panel Line Out (Front Speakers) Default Line In (Surround) Mic In (Center/Sub) Default Default 1.10.1 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer to Section 1.2, page 16 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Product Description
21
1.9.1
Serial Port
The serial port is implemented as a 10-pin header on the board. The serial port
supports data transfers at speeds up to 115.2 kbits/s with BIOS support.
For information about
Refer to
The location of the serial port header
Figure 9, page 39
1.10
Audio Subsystem
The board supports Intel High Definition Audio through the Realtek ALC662 audio
codec interface.
The Realtek ALC662-based audio subsystem supports the following features:
•
6+2-channel audio with independent multi-streaming stereo.
•
Advanced jack sense for the back panel audio jacks that enables the audio codec to
recognize the device that is connected to an audio port.
The back panel audio
jacks are capable of retasking according to the user’s definition, or can be
automatically switched depending on the recognized device type.
•
Stereo input and output through back panel jacks
•
Headphone and Mic in functions for front panel audio jacks
•
A signal-to-noise (S/N) ratio of 90 dB
Table 5 lists the supported functions of the front panel and back panel audio jacks.
Table 5.
Audio Jack Support
Audio Jack
Micro-
phone
Head-
phones
Line Out
(Front
Speakers)
Line In
(Surround)
Mic In
(Center/Sub)
FP Green
Default
FP Pink
Default
Rear Blue
Default
Rear Green
Ctrl panel
Default
Rear Pink
Default
1.10.1
Audio Subsystem Software
Audio software and drivers are available from Intel’s World Wide Web site.
For information about
Refer to
Obtaining audio software and drivers
Section 1.2, page 16