Intel DH61HO Technical Product Specification - Page 43

Power Supply Connectors, CAUTION

Get Intel DH61HO PDF manuals and user guides View all Intel DH61HO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Technical Reference 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, pins 11, 12, 23, and 24 must remain unconnected. • Processor core power - a 2 x 2 connector. This connector provides power directly to the processor voltage regulator and must always be used. Failure to do so will prevent the board from booting. CAUTION If a high power (75 W or greater) add-in card is installed in the PCI Express x16 connector, that card must also be connected directly to the power supply. Failure to do so may cause damage to the board and the add-in card. Table 18. Processor Core Power Connector Pin Signal Name 1 Ground 3 +12 V Pin Signal Name 2 Ground 4 +12 V Table 19. Main Power Connector Pin 1 2 3 4 5 6 7 8 9 10 11 12 Signal Name +3.3 V +3.3 V Ground +5 V Ground +5 V Ground PWRGD (Power Good) +5 V (Standby) +12 V +12 V (Note) +3.3 V 2 x 12 connector detect (Note) Pin 13 14 15 16 17 18 19 20 21 22 23 24 Signal Name +3.3 V −12 V Ground PS-ON# (power supply remote on/off) Ground Ground Ground −5 V (obsolete) +5 V +5 V +5 V (Note) Ground (Note) Note: When using a 2 x 10 power supply cable, this pin will be unconnected. For information about Power supply considerations Refer to Section 2.5.1 on page 49 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Technical Reference
43
2.2.2.3
Power Supply Connectors
The board has the following power supply connectors:
•
Main power
– a 2 x 12 connector.
This connector is compatible with 2 x 10
connectors previously used on Intel Desktop boards.
The board supports the use
of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables.
When
using a power supply with a 2 x 10 main power cable, pins 11, 12, 23, and
24 must remain unconnected.
•
Processor core power
– a 2 x 2 connector.
This connector provides power
directly to the processor voltage regulator and must always be used.
Failure to do
so will prevent the board from booting.
CAUTION
If a high power (75 W or greater) add-in card is installed in the PCI Express x16
connector, that card must also be connected directly to the power supply.
Failure to
do so may cause damage to the board and the add-in card.
Table 18.
Processor Core Power Connector
Pin
Signal Name
Pin
Signal Name
1
Ground
2
Ground
3
+12 V
4
+12 V
Table 19.
Main Power Connector
Pin
Signal Name
Pin
Signal Name
1
+3.3 V
13
+3.3 V
2
+3.3 V
14
−12 V
3
Ground
15
Ground
4
+5 V
16
PS-ON# (power supply remote on/off)
5
Ground
17
Ground
6
+5 V
18
Ground
7
Ground
19
Ground
8
PWRGD (Power Good)
20
−5 V (obsolete)
9
+5 V (Standby)
21
+5 V
10
+12 V
22
+5 V
11
+12 V
(Note)
23
+5 V
(Note)
12
+3.3 V 2 x 12 connector detect
(Note)
24
Ground
(Note)
Note:
When using a 2 x 10 power supply cable, this pin will be unconnected.
For information about
Refer to
Power supply considerations
Section 2.5.1 on page 49