Intel DP43BF Intel Desktop Board DP43BFL Technical Product Specification - Page 18
System Memory - dp43bfl memory
View all Intel DP43BF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Intel Desktop Board DP43BFL Technical Product Specification 1.5 System Memory The board has four DIMM sockets and supports the following memory features: • 1.8 V DDR3 800 MHz, DDR3 1066 MHz, and DDR3 1333 (OC) MHz SDRAM DIMMs • Two independent memory channels with interleaved mode support • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported. • 8 GB maximum total system memory (with 2 Gb memory technology). Refer to Section 2.1.1 on page 39 for information on the total amount of addressable memory. • Minimum total system memory: 512 MB • Non-ECC DIMMs • Serial Presence Detect NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency. Table 4 lists the supported DIMM configurations. Table 4. Supported Memory Configurations DIMM Capacity 1024 MB 2048 MB 2048 MB 4096 MB Configuration (Note) SS DS SS DS SDRAM Density 1 Gbit 1 Gbit 2 Gbit 2 Gbit SDRAM Organization Front-side/Back-side 1 Gb x8/empty 1 Gb x8/1 Gb x8 2 Gb x8/empty 2 Gb x8/2 Gb x8 Number of SDRAM Devices 8 16 8 16 Note: "DS" refers to double-sided memory modules (containing two rows of SDRAM) and "SS" refers to single-sided memory modules (containing one row of SDRAM). 18