Intel DP43BF Intel Desktop Board DP43BFL Technical Product Specification - Page 71
Error Messages and Beep Codes - memory problems
View all Intel DP43BF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4 Error Messages and Beep Codes 4.1 Speaker The board-mounted speaker provides audible error code (beep code) information during POST. For information about The location of the onboard speaker Refer to Figure 1, page 13 4.2 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's speaker to beep an error message describing the problem (see Table 37). Table 37. BIOS Beep Codes Type Pattern Frequency Processor initialization complete One 0.5 second beep when the CPU initialization 3270 Hz process completes. POST complete One 0.5 second beep when POST completes. 3270 Hz BIOS update in progress None Video error On-off (0.5 seconds each) two times, then 3.0 second pause (off), entire pattern repeats (beeps and pause) until the system is powered off. 3270 Hz When no VGA option ROM is found. Memory error On-off (0.5 seconds each) three times, then 3.0 second pause (off), entire pattern repeats (beeps and pause) until the system is powered off. 1280 Hz Thermal trip warning On-off (0.5 seconds each) four times, then 3.0 second pause (off), entire pattern repeats (beeps and pause) until the sixteenth beep, then ends. 1280 Hz 71