Intel DP55WB Product Specification - Page 24
Hardware Management Subsystem - processor support
UPC - 735858209151
View all Intel DP55WB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Intel Desktop Board DP55WB Technical Product Specification 1.10 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • Fan monitoring and control • Thermal and voltage monitoring • Chassis intrusion detection 1.10.1 Hardware Monitoring and Fan Control The features of the hardware monitoring and fan control include: • Fan speed control controllers and sensors provided by the Hardware Monitoring and Fan Control ASIC • Thermal sensor in the processor, the Hardware Monitoring ASIC and a remote thermal diode • Power supply monitoring of five voltages (+5 V, +12 V, +3.3 V, +Vsm, and +VCCP) to detect levels above or below acceptable values • Thermally monitored closed-loop fan control, for all three fans, that can adjust the fan speed or switch the fans on or off as needed 1.10.2 Fan Monitoring Fan monitoring can be implemented using Intel® Desktop Utilities or third-party software. For information about The functions of the fan headers Refer to Section 1.11.2.2, page 29 1.10.3 Chassis Intrusion and Detection The board supports a chassis security feature that detects if the chassis cover is removed. The security feature uses a mechanical switch on the chassis that attaches to the chassis intrusion header. When the chassis cover is removed, the mechanical switch is in the closed position. For information about The location of the chassis intrusion header Refer to Figure 10, page 39 24