Intel MFS5520VI User Guide - Page 91
Table 11. Server Management Screen Details
UPC - 735858209250
View all Intel MFS5520VI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
The following table describes the features of the Server Management screen. Table 11. Server Management Screen Details Setup Item Options Description Assert NMI on SERR Assert NMI on PERR Enabled Disabled Enabled Disabled Resume on AC Power Loss Stay Off Last state Reset Clear System Event Log Enabled Disabled FRB-2 Enable Enabled Disabled O/S Boot Watchdog Timer Enabled Disabled O/S Boot Watchdog Timer Policy Power Off Reset O/S Boot Watchdog Timer Timeout Plug & Play BMC Detection 5 minutes 10 minutes 15 minutes 20 minutes Enabled Disabled On SERR, generate an NMI and log an error. On PERR, generate an NMI and log an error. NOTE: This option is only active if the Assert NMI on SERR option is [Enabled] selected. Set the compute module action to take on AC power loss recovery. [Stay Off] - compute module stays off. [Last State] - compute module returns to the same state before the AC power loss. [Reset] - compute module powers on. If enabled, this option clears the System Event Log. All current entries are lost after saving changes and rebooting the compute module. NOTE: This option is reset to [Disabled] after a reboot. Fault Resilient Boot (FRB). If enabled, the BIOS programs the BMC watchdog timer for approximately 6 minutes. If the BIOS does not complete POST before the timer expires, the BMC resets the compute module. BIOS programs the watchdog timer with the timeout value selected. If the OS does not complete booting before the timer expires, the BMC resets the compute module and an error is logged. Requires OS support or Intel® Management Software. If the OS watchdog timer is enabled, this is the compute module action taken if the watchdog timer expires. [Reset] - Compute module performs a reset. [Power Off] - Compute module powers off. NOTE: This option is grayed out when O/S Boot Watchdog Timer is disabled. If the OS watchdog timer is enabled, this is the timeout value BIOS will use to configure the watchdog timer. NOTE: This option is grayed out when O/S Boot Watchdog Timer is disabled. If enabled, BMC will be detectable by OSs which support plug and play loading of an IPMI driver. Do not enable if your OS does not support this driver. Intel® Compute Module MFS5520VI User Guide 77