Intel P4000S Service Guide - Page 28

Installing the Front Bezel

Get Intel P4000S PDF manuals and user guides View all Intel P4000S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Hardware Installations and Upgrades 4. Release the two plastic tabs on the left side of the bezel assembly to disengage the tabs, and rotate the bezel assembly (see letter A) no more than 40 degrees outward. 5. At a 40-degree angle, push the bezel assembly away from the chassis (see letter B). 6. If the bezel assembly does not immediately disconnect from the chassis, tap the left-hand side of the bezel assembly to disengage the bezel hooks on the right-hand side of the chassis. Figure 16. Removing the Front Bezel Installing the Front Bezel 1. Fit the right edge of the bezel assembly against the right side of the chassis. 2. Engage the plastic bezel hooks (see letter A) into the raised metal slots at the chassis edge. 3. Rotate the bezel assembly toward the chassis. 4. Latch the two plastic tabs (see letter B) on the left side of the bezel assembly to the chassis. Figure 17. Installing the Front Bezel 16 Intel® Server Chassis P4000S Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Hardware Installations and Upgrades
16
Intel
®
Server Chassis P4000S Service Guide
4.
Release the two plastic tabs on the left side of the bezel assembly to disengage the tabs, and rotate
the bezel assembly (see letter
A
) no more than 40 degrees outward.
5.
At a 40-degree angle, push the bezel assembly away from the chassis (see letter
B
).
6.
If the bezel assembly does not immediately disconnect from the chassis, tap the left-hand side of the
bezel assembly to disengage the bezel hooks on the right-hand side of the chassis.
Figure 16. Removing the Front Bezel
Installing the Front Bezel
1.
Fit the right edge of the bezel assembly against the right side of the chassis.
2.
Engage the plastic bezel hooks (see letter
A
) into the raised metal slots at the chassis edge.
3.
Rotate the bezel assembly toward the chassis.
4.
Latch the two plastic tabs (see letter
B
) on the left side of the bezel assembly to the chassis.
Figure 17. Installing the Front Bezel