Intel P4000S Service Guide - Page 32

Removing and Installing Fixed Hard Drives

Get Intel P4000S PDF manuals and user guides View all Intel P4000S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Hardware Installations and Upgrades Removing and Installing Fixed Hard Drive(s) NOTE This procedure applies only to the Intel® Server Chassis P4000S family with fixed HDD configuration. Removing Fixed Hard Drive(s) 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 5. Remove the Fixed HDD EMI shield. For instructions, see "Removing the Fixed HDD EMI Shield". 6. Remove power and data cables from the hard drive connectors. 7. Pull out the HDD carrier tray. Figure 24. Removing Fixed Hard Drives 8. Use screwdriver to release the 3.5'' or 2.5'' HDD from the carrier tray. Figure 25. Removing the 3.5'' HDD from Fixed HDD tray 20 Intel® Server Chassis P4000S Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Hardware Installations and Upgrades
20
Intel
®
Server Chassis P4000S Service Guide
Removing and Installing Fixed Hard Drive(s)
NOTE
This procedure applies only to the Intel
®
Server Chassis P4000S family with fixed HDD configuration.
Removing Fixed Hard Drive(s)
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
3.
Remove the chassis cover. For instructions, see “Removing the Chassis Cover”
.
4.
Remove the front bezel if it is installed. For instructions, see “Removing the Front Bezel”.
5.
Remove the Fixed HDD EMI shield. For instructions, see
“
Removing the Fixed HDD EMI Shield
”
.
6.
Remove power and data cables from the hard drive connectors.
7.
Pull out the HDD carrier tray.
Figure 24. Removing Fixed Hard Drives
8.
Use screwdriver to release the 3.5'' or 2.5'' HDD from the carrier tray.
Figure 25. Removing the 3.5'' HDD from Fixed HDD tray