Intel P4000S Service Guide - Page 30
Removing and Installing the Fixed HDD EMI Shield
View all Intel P4000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Hardware Installations and Upgrades 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 5. Remove an EMI shield (see picture below). Figure 20. Removing EMI Shield 6. Get the slides from the chassis side (see letter B). Attach slides to the DVD or CD-ROM drive by pressing the slides firmly into the side dimples on the DVD or CD-ROM drives (see letter C). Insert the drive/slide assembly into the device bay until the slides lock into place (see letter D). Figure 21. Installing DVD or CD-ROM Drive 7. Connect the DVD or CD-ROM power cable. See your server board documents for data cable connection. Removing and Installing the Fixed HDD EMI Shield NOTE For a chassis on its side, position the chassis hanging over the edge of a table or workbench before removing the bezel. This procedure applies only to the Intel® Server chassis P4000S family with fixed HDD configuration. Removing the Fixed HDD EMI Shield 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 18 Intel® Server Chassis P4000S Service Guide