Intel P4000S Service Guide - Page 29
Removing and Installing a DVD or CD-ROM Drive
View all Intel P4000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Hardware Installations and Upgrades Removing and Installing a DVD or CD-ROM Drive Removing a DVD or CD-ROM Drive 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 5. Disconnect the power and data cables to the DVD/CD-ROM drive. 6. Press on the slide release latches (see letter A in the following figure) and pull the DVD/CD-ROM drive/slide assembly from the chassis (see letter B in the following figure). Remove the slides from the DVD or CD-ROM drive (see letter C). Figure 18. Removing DVD or CD-ROM Drive 7. If not replacing with another drive, reinsert an EMI shield into chassis (see below picture). Figure 19. Re-inserting Empty EMI Shield Installing a DVD or CD-ROM Drive 1. Observe the safety and ESD precautions at the beginning of this book. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover". Intel® Server Chassis P4000S Service Guide 17