Intel S5500HCV Service Guide - Page 27

Intel, RAID Activation Key, Hard Disk Drives

Page 27 highlights

Server Board Features IT/IR RAID Mode Supports entry hardware RAID 0, RAID 1, and RAID10/10E and native SAS pass through mode. Intel® ESRTII Mode The Intel® Embedded Server RAID Technology II (Intel® ESRTII) feature provides RAID modes 0, 1, and 10. If RAID 5 is needed with Intel® ESRTII, you must install the optional Intel® RAID Activation Key AXXRAKSW5 accessory. This activation key is placed on the SAS Software RAID 5 connector located on the Intel® SAS Entry RAID Module AXX4SASMOD. For installation instructions, see the documentation included with the SAS Module AXX4SASMOD and the activation key. When Intel® Embedded Server RAID Technology II is enabled with the SAS Module AXX4SASMOD, enclosure management is provided through the SAS_SGPIO or SES connector on the SAS Module AXX4SASMOD when a cable is attached between this connector and the backplane or I2C interface.  NOTE For help with navigating the BIOS Setup utility, refer to the Intel® Server Board S5520HC/S5500HCV Technical Product Specification. For information on how to configure RAID, see the RAID software user's guide at: http://www.intel.com/support/motherboards/server/S5520HC/howto.htm For information about configure IT/IR RAID, see the IT/IR RAID software user's guide at: http://www.intel.com/support/motherboards/server/S5520HC/howto.htm For help with enclosure management cabling, see the Enclosure Management Cabling Guide for Pedestal Systems with Hot-swap Drive Backplanes. This guide is available at: http://support.intel.com/support/motherboards/server/S5520HC/compat.htm Intel® RAID Activation Key You can purchase and install the Intel® RAID Activation Key AXXRAKSW5 to enable Software RAID 5 support on your server board or the Intel® SAS Entry RAID Module AXX4SASMOD. For the Intel® Server Board S5520HC / S5500HCV, you can install an Intel® RAID Activation Key (AXXRAKSW5) in the SATA RAID 5 Key connector. For the Intel® SAS Entry RAID Module AXX4SASMOD, you can install an Intel® RAID Activation Key (AXXRAKSW5) in the SAS RAID 5 key connector of the SAS module card. Hard Disk Drives The Intel® Server Board S5520HC / S5500HCV support different hard disk driver options.  USB or Serial SATA (SATA) Solid State Drives  Serial SATA (SATA) and Serial Attached SCSI (SAS): - Supports for SATA Hard Disk Drive: Six on-board SATA ports at 1.5 Gbps and 3 Gbps. - Supports for SAS or SATA Hard Disk Drives: Four SAS ports via optional Intel® SAS Entry RAID Module AXX4SASMOD at 1.5 Gbps (SATA) and 3 Gbps (SATA and SAS). Intel® Server Board S5520HC and S5500HCV Service Guide 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

Server Board Features
Intel® Server Board S5520HC and S5500HCV Service Guide
27
IT/IR RAID Mode
Supports entry hardware RAID 0, RAID 1, and RAID10/10E and native SAS pass through mode.
Intel
®
ESRTII Mode
The Intel
®
Embedded Server RAID Technology II (Intel
®
ESRTII) feature provides RAID modes 0, 1, and 10. If RAID 5
is needed with Intel
®
ESRTII, you must install the optional Intel
®
RAID Activation Key AXXRAKSW5 accessory. This
activation key is placed on the SAS Software RAID 5 connector located on the Intel
®
SAS Entry RAID Module
AXX4SASMOD. For installation instructions, see the documentation included with the SAS Module AXX4SASMOD
and the activation key.
When Intel
®
Embedded Server RAID Technology II is enabled with the SAS Module AXX4SASMOD, enclosure
management is provided through the SAS_SGPIO or SES connector on the SAS Module AXX4SASMOD when a
cable is attached between this connector and the backplane or I
2
C interface.
NOTE
For help with navigating the BIOS Setup utility, refer to the Intel
®
Server Board S5520HC/S5500HCV Technical
Product Specification.
For information on how to configure RAID, see the RAID software user’s guide at:
For information about configure IT/IR RAID, see the IT/IR RAID software user’s guide at:
For help with enclosure management cabling, see the Enclosure Management Cabling Guide for Pedestal Systems
with Hot-swap Drive Backplanes. This guide is available at:
Intel
®
RAID Activation Key
You can purchase and install the Intel
®
RAID Activation Key AXXRAKSW5 to enable Software RAID 5 support on your
server board or the Intel
®
SAS Entry RAID Module AXX4SASMOD. For the Intel
®
Server Board S5520HC / S5500HCV,
you can install an Intel
®
RAID Activation Key (AXXRAKSW5) in the SATA RAID 5 Key connector. For the Intel
®
SAS
Entry RAID Module AXX4SASMOD, you can install an Intel
®
RAID Activation Key (AXXRAKSW5) in the SAS RAID 5
key connector of the SAS module card.
Hard Disk Drives
The Intel
®
Server Board S5520HC / S5500HCV support different hard disk driver options.
USB or Serial SATA (SATA) Solid State Drives
Serial SATA (SATA) and Serial Attached SCSI (SAS):
Supports for SATA Hard Disk Drive: Six on-board SATA ports at 1.5 Gbps and 3 Gbps.
Supports for SAS or SATA Hard Disk Drives: Four SAS ports via optional Intel
®
SAS Entry RAID Module
AXX4SASMOD at 1.5 Gbps (SATA) and 3 Gbps (SATA and SAS).