Intel SE7501CW2 Product Guide - Page 48

Safety and Regulatory Compliance, See Regulatory and Integration Information

Get Intel SE7501CW2 - E7501 DUAL PGA604 XEON 533MHZ PDF manuals and user guides
UPC - 735858160308
View all Intel SE7501CW2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

ESD and handling boards: Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board over any surface. Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over two jumper pins. Some jumpers have a small tab on top that you can grip with your fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab, take care when using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the stake pins on the board. Safety and Regulatory Compliance See "Regulatory and Integration Information" on page 87 for product Safety and EMC regulatory compliance information. Intended uses: This product was evaluated for use in servers that will be installed in offices, computer rooms, and similar locations. Other uses require further evaluation. EMC testing: Before computer integration, make sure that the chassis, power supply, and other modules have passed EMC testing using a server board with a microprocessor from the same family (or higher) and operating at the same (or higher) speed as the microprocessor used on this server board. Server board diagram label provided: Place the label inside the chassis in an easy-to-see location, preferably oriented similarly to the server board. 48 Intel Server Board SE7501CW2 Product Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
48
Intel Server Board SE7501CW2 Product Guide
ESD and handling boards:
Always handle boards carefully.
They can
be extremely sensitive to ESD.
Hold boards only by their edges.
After
removing a board from its protective wrapper or from the server, place the
board component side up on a grounded, static free surface.
Use a
conductive foam pad if available but not the board wrapper.
Do not slide
board over any surface.
Installing or removing jumpers:
A jumper is a small plastic encased
conductor that slips over two jumper pins.
Some jumpers have a small tab on
top that you can grip with your fingertips or with a pair of fine needle nosed
pliers.
If your jumpers do not have such a tab, take care when using needle
nosed pliers to remove or install a jumper; grip the narrow sides of the
jumper with the pliers, never the wide sides.
Gripping the wide sides can
damage the contacts inside the jumper, causing intermittent problems with
the function controlled by that jumper.
Take care to grip with, but not
squeeze, the pliers or other tool you use to remove a jumper, or you may
bend or break the stake pins on the board.
Safety and Regulatory Compliance
See “Regulatory and Integration Information”
on page 87 for product Safety and EMC regulatory
compliance information.
Intended uses
:
This product was evaluated for use in servers that will be installed in offices,
computer rooms, and similar locations.
Other uses require further evaluation.
EMC testing
:
Before computer integration, make sure that the chassis, power supply, and other
modules have passed EMC testing using a server board with a microprocessor from the same
family (or higher) and operating at the same (or higher) speed as the microprocessor used on this
server board.
Server board diagram label provided
:
Place the label inside the chassis in an easy-to-see location,
preferably oriented similarly to the server board.