Intel SR1550ALSAS User Guide - Page 41
Hardware Installations and, Upgrades
![]() |
View all Intel SR1550ALSAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3 Hardware Installations and Upgrades Before You Begin Before working with your server product, pay close attention to the "Safety Information" at the beginning of this manual. Tools and Supplies Needed • Phillips* (cross head) screwdriver (#1 bit and #2 bit) • Needle nosed pliers • Antistatic wrist strap and conductive foam pad (recommended) System References All references to left, right, front, top, and bottom assume the reader is facing the front of the server system as it would be positioned for normal operation. Removing and Installing from a Rack Three Intel® rack options are available to install the Intel® Server System SR1550AL in a rack. The options are the fixed bracket kit, the basic rail kit, and the tool-less rail kit. Only the tool-less rail kit allows you to service the server system while installed in a rack. The other rack options require the system to be removed from the rack before servicing. Note: Follow all safety guidelines while removing a system from a rack to avoid injury. Fixed Bracket Rack Mount Removal 1. Disconnect all cables from the back of the system. Note: Remember to use the system LED to properly identify the system you are servicing. 2. Remove screws from the brackets and remove the system from the rack.
![](/manual_guide/products/intel-sr1550al-user-guide-13ca15c/41.png)