Intel SR1550ALSAS User Guide - Page 50

Installing and Removing Memory The silkscreen on the board for the DIMMs displays DIMM A1, DIMM A2, DIMM B1, DIMM B2, DIMM C1, DIMM C2, DIMM D1 and DIMM D2 starting from the center of the board. See "Memory" for a discussion of the memory requirements and options. See "Server System References" for a link to the list of tested DIMMs. Installing DIMMs To install DIMMs, follow these steps: 1. Observe the safety and ESD precautions in "Safety Information". 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the AC power cord from the server. 4. Remove the server's cover. For instructions, see "Removing the Chassis Cover". 5. Locate the DIMM sockets (see Figure 24). DIMM B2 Socket DIMM B1 Socket DIMM A2 Socket DIMM A1 Socket DIMM C1 Socket DIMM C2 Socket DIMM D1 Socket DIMM D2 Socket D A C B TP02072 Figure 24. Installing the Memory 30 Intel® Server System SR1550AL/SR1550ALSAS User's Guide