Intel SR1550ALSAS User Guide - Page 44
Removing and Installing the Front Bezel
View all Intel SR1550ALSAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
11. Slide the server chassis all the way into the rack. 12. Use the rack screws (#10-32 x 3/4) to secure the chassis and rack handles into the rack. Tool-less Rail Rack Mount Servicing 1. To service the system, pull the system out from the rack. 2. Disconnect the power cable(s) and proceed with servicing the system. 3. When the servicing is completed, re-connect the power cable(s). 4. Pull up on the green tabs on each rail and slide the system back into the rack. Note: Beware of cables when re-installing the system into the rack so that the cables do not get pulled or interfered with. Removing and Installing the Front Bezel The front bezels are available as optional accessories for the Intel® Server System SR1550AL. Two front bezel options are available. One is used for the standard control panel and the other is used with the Intel® Local Control Panel. See the diagrams below to identify your front bezel. Note the orientation in the figures below - the control panel is at the right. If you are installing a bezel on your server system, make sure you position it as shown. TP02220 Figure 14. Front Bezel Supporting the Standard Control Panel TP02221 Figure 15. Front Bezel Supporting the Intel® Local Control Panel 24 Intel® Server System SR1550AL/SR1550ALSAS User's Guide