Intel SR1550ALSAS User Guide - Page 48
Removing and Installing the Processor Air Duct
![]() |
View all Intel SR1550ALSAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Removing and Installing the Processor Air Duct Always operate your server server system with the processor air duct in place. The air duct is required for proper airflow within the server system. For instructions on adding or replacing a processor, first remove the processor air duct, and then see your server board user guide for instructions on processor installations and removals. Return to these instructions to reinstall the processor air duct after installing your processor and heat sink. Removing the Processor Air Duct 1. Observe the safety and ESD precautions at the beginning of this book. See ""Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Chassis Cover". 4. Lift the processor air duct from its location over the two processor sockets. TP02225 Figure 21. Removing the Processor Air Duct 28 Intel® Server System SR1550AL/SR1550ALSAS User's Guide
![](/manual_guide/products/intel-sr1550al-user-guide-13ca15c/48.png)