Intel SSR212CC User Guide - Page 40
Grounding Checks, Removing or Installing the PCI Riser Assembly, Blanking Plates
View all Intel SSR212CC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Hardware Installations and Upgrades Grounding Checks This product must only be connected to a power source that has a safety electrical earth connection. Warning: If more than one product is fitted in a rack, the earth connection to the rack is even more important, because the rack will then have a high "EARTH LEAKAGE CURRENT" ("TOUCH CURRENT"). The earth connection to the rack must be checked before switching on, by an electrical engineer who is qualified to the appropriate local and National standards to perform the check. Removing or Installing the PCI Riser Assembly Always operate your storage system with the PCI riser assembly in place. The PCI riser assembly is required for proper airflow within the chassis. You will need to remove the PCI riser assembly from the chassis to replace the PCI riser connectors, or to add or remove a PCI add-in card. Warning: This module is not "hot-pluggable". Prior to removing the riser card module from the enclosure, disconnect the power from the power supply by either turning off the main switch (if present) or by physically removing the power source. Blanking Plates A blanking plate must be fitted into any vacant PCI card slots. Removing the PCI Riser Assembly Caution: Before performing any maintenance on the system, back up the data. Follow the instructions in the Intel® Storage System Software User Manual for shutting down the system. 1. Observe all safety and ESD precautions listed in Appendix D, "Safety Information". 2. Turn off all peripheral devices connected to the storage system. Turn off the storage system. 3. Disconnect the AC power cord(s). 4. Remove the enclosure cover. For instructions, see "Removing the Enclosure Cover" on page 14. 5. Remove the cooling module. For instructions, see "Removing the Cooling Module" on page 51. 6. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 72. 22 Intel® Storage System SSR212CC User Guide