Intel SSR212CC User Guide - Page 48
Removing and Installing an Intel® RAID Controller, Removing an Intel, RAID Controller - motherboard
View all Intel SSR212CC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Hardware Installations and Upgrades Removing and Installing an Intel® RAID Controller Up to two Intel® RAID Controller cards can be installed in the upper two slots of the PCI riser assembly. The third riser slot is currently not used, but may be available in future upgrades. Removing an Intel® RAID Controller Caution: Before performing any maintenance on the system, back up the data. Follow the instructions in the operating system manual for shutting down the system. Caution: Refer to the support site at http://www.intel.com/support/motherboards/server/ssr212ma for the appropriate firmware version to use. 1. Observe all safety and ESD precautions listed in Appendix D, "Safety Information". 2. Turn off all peripheral devices connected to the storage system. Turn off the storage system. 3. Disconnect the AC power cord(s). 4. Remove the enclosure cover. For instructions, see "Removing the Enclosure Cover" on page 14. 5. Remove the cooling module. For instructions, see "Removing the Cooling Module" on page 51. 6. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 22. 30 Intel® Storage System SSR212CC User Guide