Intel SSR212CC User Guide - Page 51
Installing an Intel® RAID Controller,
View all Intel SSR212CC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Hardware Installations and Upgrades Installing an Intel® RAID Controller Caution: Before performing any maintenance on the system, back up the data. Follow the instructions in the operating system manual for shutting down the system. Caution: Refer to the support site at http://www.intel.com/support/motherboards/server/ssr212cc for the appropriate firmware version to use. 1. Observe all safety and ESD precautions listed in Appendix D, "Safety Information". 2. Turn off all peripheral devices connected to the storage system. Turn off the storage system. 3. Disconnect the AC power cord(s). 4. Remove the enclosure cover. For instructions, see "Removing the Enclosure Cover" on page 14. 5. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 22. 6. Unpack the Intel® RAID Controller. Remove the Intel® RAID Controller from the anti-static bag and inspect for damage. Contact Intel or your Intel support representative if the Intel® RAID Controller appears damaged. 7. Configure the jumper settings on the Intel® RAID Controller using the jumper definitions and locations in the documentation that shipped with the card. 8. Connect the extended battery cable to the battery backup unit. TP02339 Figure 33. Connecting Extended Battery Cable to Battery Backup Unit Intel® Storage System SSR212CC User Guide 33