Home » Intermec Manuals » Handheld Devices » Intermec CN51 » Manual Viewer

Intermec CN51 Intermec Terminal Emulator (ITE) User Guide - Page 59

About VT/ANSI Options, VT/ANSI Protocol Options, Protocol Options continued

Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Chapter 2 - Configuring and Managing ITE 3270 Protocol Options (continued) Option Enable TN3270E Keybrd Unlock Origin Set 3270 Use Color Description Value When enabled, ITE emulates an IBM 3278-2-E Enabled or Disabled. terminal. If 3270 Use Color is also enabled, ITE Default is Disabled. emulates an IBM-3279-3-E terminal. When disabled, ITE emulates either an IBM3278-2 or IBM-3279-3 terminal, depending on the 3270 Use Color setting. When enabled, unlocks the keyboard after the Enabled or Disabled. PA1, PA2, or Clear keys are pressed. When Default is Disabled. using Token Ring on your host, the Tab key also unlocks the keyboard. When enabled, resets the screen origin when an Enabled or Disabled. exclamation mark is found in the data stream. Default is Disabled. When enabled, ITE emulates an IBM-3279-3 Enabled or Disabled. terminal and accepts Start Field Extended and Default is Disabled. Set Buffer commands which contain color data. When disabled, ITE emulates an IBM-3278-2 terminal. About VT/ANSI Options This section describes configurable settings for VT/ANSI emulation. VT/ANSI Protocol Options Option Description Value Allow LineMode Answerback Auto Wrap CR to CRLF When enabled, the terminal prompts to On or Off. negotiate to the default LineMode RFC 1184. Default is On. When disabled, the terminal does not negotiate to LineMode RFC 1184. When enabled, the computer sends this Range is 0 to 50 character string to the host in response to an characters. inquiry (hexadecimal 05). When ENQ is sent, Default is the computer only the first thirty characters of the name are serial number. transmitted back to the host. For more information, see "About the Answerback Character String" on page 49. When enabled, graphic display characters On or Off. received when the cursor is at the right margin Default is Off. appear on the next line. The screen scrolls up if the cursor is at the end of the scrolling region. When disabled, graphic characters received when the cursor is at the right margin replace previously displayed characters. When enabled, pressing Enter performs a carriage return and a line feed. On or Off. Default is Off. When disabled, pressing Enter performs a carriage return only. Intermec Terminal Emulator (ITE) User Guide 47

Section	Page
Before You Begin	11
Safety Information	11
Global Services and Support	11
Warranty Information	11
Web Support	11
Telephone Support	11
Send Feedback	11
Who Should Read This Manual	12
Related Documents	12
Chapter 1: Getting Started	13
About Intermec Terminal Emulator	14
About ITE Licensing	14
Checking Licenses Out with SmartSystems	15
About Intermec License Manager	15
Setting Up the Computer and the Network	15
About ITE and Network Protocols	16
Installing ITE on Your Intermec Computer	16
Launching ITE	18
Closing ITE	19
Communicating Through Your WWAN Connection	19
Enabling the Phone On The CN50 and CS40 Mobile Computers	20
About ITE Applications	20
About Annunciators	20
About Alert Sounds	22
3270 Alert Sounds	22
5250 Alert Sounds	22
VT/ANSI Alert Sounds	22
Changing Alert Sounds and Volume	22
About 3270 Emulation Mode	22
3278 SNA Keys	22
AID-Generating Keys	23
About 5250 Applications	23
Special Function Keys	23
Additional Functions	26
System Messages	26
About VT/ANSI Applications	27
Main Keypad	27
VT/ANSI Editing Keypad	27
VT/ANSI Auxiliary Keys	28
VT/ANSI Top-Row Function Keys	28
Transmission Mode	29
Local Edit Mode	29
Printing and Serial Scanning	29
Chapter 2: Configuring and Managing ITE	31
Managing ITE With SmartSystems	32
Configuring ITE With Intermec Settings	33
Starting Intermec Settings Remotely With SmartSystems Foundation	34
Configuring Options for Each Session	35
Configuring a TCP/IP Connection	37
About the Keyboard Type, Charset, and Code Page Options	39
Configuring ITE for SSL	41
Installing Certificate Files	43
Configuring ITE for SSH	43
Using a Configuration File for SSH Settings	44
Locking Down SSH Applications	44
SSH Server Application Programming Hints	45
About Session Persistence	46
About the Telnet Gateway Appliance (TGAP)	46
About the KeyAlive Function	46
Configuring Bar Code Scanning Options	47
Configuring Bar Code Symbology Settings	50
Additional Decode Settings	51
Setting Bar Code Lengths	52
About EAN/UPC Drop Leading and Drop Trailing Values	53
Configuring Protocol Options	54
About 5250 Options	56
About 3270 Options	58
About VT/ANSI Options	59
About the Answerback Character String	61
About UTF-8 Encoding	62
About RS232 Setup Options	62
Selecting ITE Fonts and Screen Behaviors	63
About Code Page Options	65
Configuring ITE Screen Sizes and Colors	65
About Screen Mode	68
Moving the ITE Viewport by Dragging Across the Screen	69
Moving the Cursor Location by Tapping the Screen	70
About the Focus via Touch Panel Feature	70
Selecting a Printer	71
Configuring for UDP Plus	72
Using the Out of Range Monitor	75
Configuring Scan Control Settings	76
Configuring Access to ITE	77
About the No Lockdown Setting	77
Enabling the Configuration Menu Password	78
Enabling License Check-Out	78
Configuring the ITE Toolbar	79
Selecting Items for the Menu Button	84
About Lockdown Mode and Accessing the Windows Start Menu	85
Enabling the ITE Exit Password	85
Using Voice over IP	85
Using ITE with HipVoice	85
Using ITE with iTalkie	86
About VoIP Error Messages	86
Using the SnapShot Feature	87
Configuring SnapShot Image Settings	89
Configuring SnapShot Settings	89
Enabling a Trusted Application	90
Setting the COM Port (CV41 and CV61 only)	91
Connecting to an RFID Reader	91
Chapter 3: Customizing Your Configuration	93
Customizing Intermec Terminal Emulator	94
Using the Auto-Login Feature	94
Developing Auto-Login Script Files	94
Commands for Auto-Login Script Files	94
Display	94
Input	95
InputHidden	95
HostName	95
WaitFor	95
Send	95
Pause “xxxxx”	95
PromptSessionStart	95
Restart “x”	95
KeyBoard “0”	96
KeyBoard “1”	96
# (pound symbol)	96
Using Auto-Login Search Strings	96
Using Control Characters	96
Loading the Auto-Login Script File	98
Disabling the Auto-Login Feature	98
Sample Auto-Login Script Files	99
Restarting the Auto-Login	101
Creating a Custom Parameter File	101
Upgrading from Config.dat Configuration	101
TE_Settings.ini Configuration	102
TE_Settings.ini Parameter Formats	102
TE_Settings.ini Parameters and Qualifiers	103
Setup Parameters	103
Server-Specific Options and Descriptions	105
Bar Code Parameters	107
Bar Code Symbology Parameters	107
Generic Bar Code Options	108
UPC Options	110
EAN Options	110
Code 39 Options	110
Code 11, Interleaved 2 of 5, and Plessey Options	111
Code 128 Options	111
Generic Protocol Options	111
3270 Protocol Options	112
5250 Protocol Options	112
VT/ANSI Protocol Options	113
Display Options	114
Miscellaneous Options	115
LCD Options	116
Non-Session-Specific Parameters	117
UDP Plus Parameters	118
Camera and Imager Parameters	118
Additional Main Menu 2 Options	119
Toolbar Options	120
Debug Parameters	127
Changing Text in Menus, Messages, and Settings	128
Preinitializing the ITE Program	128
Preinitializing the 3270 Program	129
Preinitializing the 5250 Program	130
Preinitializing the VT/ANSI Program	130
Remapping the Computer Keypad	130
Remapping a Key or Two-Key Sequence	131
Creating a Remapping Macro	132
Nesting Macros	132
Remapping Keys for Each Session	133
Key Code Table	133
3270 Key Codes	135
5250 Key Codes	136
VT/ANSI Key Codes	136
String Code Table	137
Remapping Displayed Characters	138
Implementing ITCColor.dat Attribute Colors	140
Sample Color File	141
Customizing 5250 EBCDIC to ASCII Translation	142
Creating the Custom EBCDIC_ASCII Translation Table	142
Displaying EBCDIC Non-English Code Pages	143
About Custom Translation Tables for Code Page 1250 and 1252	144
Default Translation Tables for Code Page 1250	146
Default Translation Tables for Code Page 1252	149
ASCII to EBCDIC	156
EBCDIC to ASCII	157
Appendix A: Bar Code Scanning	159
Scanning Bar Codes While Using ITE	160
Paging Keys	160
Cursor Keys	160
Tab Keys	161
Auto-Login Restart	161
3278 SNA Keys	161
AID-Generating or Top-Row Function Keys	162
Symbols - 3270, 5250	165
Field Exit Key - 5250	165
Signal Keys - 5250	165
Special Control Keys - 5250	166
Special Host Key - 5250	166
5250 Additional Functions	166
Special Function Keys - VT/ANSI	167
Editing Keys - VT/220/320	167
Preamble and Postamble	168
Encoded Code 39	169
Terminating Keys	171
Escape Characters	172
Overriding Auto Tab Scan and Auto Enter Scan (3270)	172
Appendix B: Using the Computer Keypad	173
About ITE and Computer Keypads	174
About the Soft Input Panels	174
Changing the SIP Key Color	175
Creating Custom SIPs	175
3270 Keypads	176
5250 Keypads	177
VT/ANSI Keypads	178
About the SIP Keys	179
Using the CK3 Keypads	182
Using the CK70 Keypads	186
Using the CK71 Keypads	189
Using the CN3, CN3e, CN4, and CN4e Keypads	193
Using the CN50 and CS40 Keypads	195
Using the CN70 and CN70e Keypads	197
Using the CV41 Keypad	199
Using SIPs on the CV41 (Windows Embedded Standard) and CV61	203
Customizing the SIPs	203
Changing the Size and Alignment of the CV41 or CV61 SIP	204
Macros for SIPs	205
CV41 and CV61 SIPs	208

Match case Limit results 1 per page

Chapter 2 — Configuring and Managing ITE

Intermec Terminal Emulator (ITE) User Guide

About VT/ANSI Options

This section describes configurable settings for VT/ANSI emulation.

Enable TN3270E

When enabled, ITE emulates an IBM 3278-2-E

terminal. If 3270 Use Color is also enabled, ITE

emulates an IBM-3279-3-E terminal.

When disabled, ITE emulates either an IBM-

3278-2 or IBM-3279-3 terminal, depending on

the 3270 Use Color setting.

Enabled or Disabled.

Default is Disabled.

Keybrd Unlock

When enabled, unlocks the keyboard after the

PA1

PA2

, or

Clear

keys are pressed. When

using Token Ring on your host, the

Tab

key also

unlocks the keyboard.

Enabled or Disabled.

Default is Disabled.

Origin Set

When enabled, resets the screen origin when an

exclamation mark is found in the data stream.

Enabled or Disabled.

Default is Disabled.

3270 Use Color

When enabled, ITE emulates an IBM-3279-3

terminal and accepts Start Field Extended and

Set Buffer commands which contain color data.

When disabled, ITE emulates an IBM-3278-2

terminal.

Enabled or Disabled.

Default is Disabled.

VT/ANSI Protocol Options

Option

Description

Value

Allow LineMode

When enabled, the terminal prompts to

negotiate to the default LineMode RFC 1184.

When disabled, the terminal does not negotiate

to LineMode RFC 1184.

On or Off.

Default is On.

Answerback

When enabled, the computer sends this

character string to the host in response to an

inquiry (hexadecimal 05). When ENQ is sent,

only the first thirty characters of the name are

transmitted back to the host.

For more information, see

“About the

Answerback Character String” on page 49.

Range is 0 to 50

characters.

Default is the computer

serial number.

Auto Wrap

When enabled, graphic display characters

received when the cursor is at the right margin

appear on the next line. The screen scrolls up if

the cursor is at the end of the scrolling region.

When disabled, graphic characters received

when the cursor is at the right margin replace

previously displayed characters.

On or Off.

Default is Off.

CR to CRLF

When enabled, pressing

Enter

performs a

carriage return and a line feed.

When disabled, pressing

Enter

performs a

carriage return only.

On or Off.

Default is Off.

3270 Protocol Options (continued)

Option

Description

Value