Intermec IP2L IP2L Snap-On LF/UHF RFID Reader User Guide - Page 35
RFID Module Settings, RFID Module Settings Descriptions
View all Intermec IP2L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 - Create RFID Applications and Configure the IP2L RFID Module Settings You can configure these RFID Module settings to to control how the reader operates and reads tags. RFID Module Settings Descriptions Setting Tag Type Dense Reader Mode LBT Scan Enable Field Separator ID Report Description Select the tag types you want the RFID reader to read. This setting is equivalent to the TAGTYPE BRI attribute. Allows the reader to hop between channels within a certain frequency spectrum to prevent other readers in the area form interfering with one another. Default is enabled. This setting is equivalent to the DENSEREADERMODE or DRM BRI attribute. When LBT scanning is enabled, the algorithm scans the available ETSI 302-208 channels for a free transmit channel. This setting is equivalent to the LBTSCANENABLE BRI attribute. Sets the character used for separating fields in tag data. Choose from space ( ), comma (,), colon (:), semicolon (;), tab, caret (^), or tilde (~). Default is space ( ). This setting is equivalent to the FIELDSEP BRI attribute. Enables or disables tag ID reporting after a Read, Write, or Lock command is executed: • For ISO tags, the tag identifier corresponds to TAGID. • For EPC tags, the identifier corresponds to EPCID. Default is enabled. This setting is equivalent to the IDREPORT BRI attribute. IP2L Snap-On LF/UHF RFID Reader User Guide 27