Intermec IP2L IP2L Snap-On LF/UHF RFID Reader User Guide - Page 37

Chapter 2 - Create RFID Applications and Configure the IP2L RFID Module Settings Descriptions (continued) Setting Write Tries Initialization Tries Lock Tries Select Tries Unselect Tries Initial Q Description Sets the maximum number of times the read algorithm is executed before a response is returned to a Write command. Valid range is 1 to 254. Default is 5. In practice, this is the number of times an identified tag is read until the Write is successful. This setting is equivalent to the WRTIES BRI attribute. Sets the maximum number of times the reader attempts to initialize a tag. Valid range is 1 to 254. Default is 1. This setting is equivalent to the INITTRIES BRI attribute. Sets the maximum number of times the lock algorithm is executed before a response is returned to a Lock command. Valid range is 1 to 254. Default is 3. This setting is equivalent to the LOCKTRIES BRI attribute. (Not supported by EPCglobal Class 1 Gen 2 tags) Sets the number of times a group select is attempted. A group select is the command that starts the identity process. Valid range is 1 to 254. Default is 1. This setting is equivalent to the SELTRIES BRI attribute. (Not supported by EPCglobal Class 1 Gen 2 tags) Sets the number of times a group unselect is attempted. Valid range is 1 to 254. Default is 1. This setting is equivalent to the UNSELTRIES BRI attribute. (EPCglobal Class 1 Gen 2 tags only) Sets the initial Q parameter value used by the Query command. Valid range is 1 to 254. Default is 4. If you know there is only one tag in the field, set this attribute to 0 for best performance. This setting is equivalent to the INITIALQ BRI attribute. IP2L Snap-On LF/UHF RFID Reader User Guide 29