Intermec PB2 PB2 Mobile Printer User's Guide - Page 18

• For maximum battery life, Intermec recommends charging the battery at 25°C (77°F). • Remove the battery from the printer before storing the printer for long periods of time. • The battery storage temperature is -20°C to 40°C (-4°F to 104°F). Do not store a fully charged battery at temperatures greater than 40°C (104°F) for long periods of time - the battery may permanently lose charge capacity. • Dispose of battery according to local regulations. Do not throw in trash. • Do not disassemble, short circuit, heat above 80°C (176°F), or incinerate. The battery may explode. For more information, see the PB2 and PB3 Battery Instructions. Loading Paper To prevent possible damage to the print mechanism, use only receipt paper rolls that are not fastened to the inside core in any way. Otherwise the core will be pulled into the mechanism causing jamming and possible gear damage. To load paper 1 Press the Paper Door button to open the paper compartment door. 18 PB2 Mobile Printer User's Guide