Intermec PB2 PB2 Mobile Printer User's Guide - Page 27

3 Install the battery in the printer and close the battery door. The printer is now configured for your connection. Using the Magnetic Stripe Reader If your PB2 includes the optional magnetic stripe reader, follow the next procedure to read cards. Note: You need an application running on the host computer to read data from the card. For more information, see the XSim Programmer's Reference Manual. PB2 Magnetic Stripe Reader Slot To use the magnetic stripe reader 1 Position the card so the magnetic stripe faces the paper door. 2 Quickly swipe the card through the reader in either direction. The Data and Status LED indicates card reading status as described in "Understanding the LEDs" on page 13. Cleaning cards for the magnetic stripe reader are available from Intermec. For information, contact your local Intermec distributor. Maintaining the Printer To clean the exterior of the printer, use a soft cloth and mild cleaner. Do not use abrasive cleaner, chemicals, or scouring pads, as these will damage the finish. PB2 Mobile Printer User's Guide 27