Intermec PB2 PB2 Mobile Printer User's Guide - Page 31

The PB2 is compatible with the XSim printer language, as well as with a subset of ESC/P commands. For more information, see one of these manuals: • XSim Programmer's Reference Manual • ESC/P Programmer's Reference Manual Intermec's Printing Resource Kit provides tools for developing mobile printing solutions for the PB2. For more information, visit www.intermec.com and choose Products > Applications & Software > Developer Library > Developer Resource Kits. Note: You can also download SDKs from www.fieldsoftware.com to help develop mobile printing solutions for certain language sets: • PrinterCE SDK • PrinterCE.NetCF SDK • PocketHTMLprint SDK Installing Printer Firmware When you install printer firmware, you also need to configure your printer hardware. Before getting started, make sure that: • your printer is set to serial mode (all DIP switches are off). • the paper roll is properly seated on your printer. • your printer is connected to your host PC with a serial cable. • Communications LED is on (green). • you have the Tera Term application installed on your host PC. Tera Term is a free, open-source terminal emulator program available from the Internet. PB2 Mobile Printer User's Guide 31