Intermec PB2 PB2 Mobile Printer User's Guide - Page 26
DIP Switch Settings, connection, make sure DIP switches 3
View all Intermec PB2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2 Change DIP switch settings by carefully pressing a pointer into the switch and sliding it to the other side. For more information, see the next table. DIP Switch Settings Turn These DIP Switches On To Set This Parameter 1 2 34 5 678 Enable Bluetooth or 802.11 connection X Enable RS-232 (serial) connection Enable IrDA connection with a variable X baud rate of 9600 to 115200 Enable IrDA connection with the default X X X baud rate fixed to 9600 Set baud rate for IrDA and 115200 RS-232 connections: 57600 X 38400 X 19200 XX 14400 X 9600 XX 2400 XX 1200 XX X Parity Bit Enabled X Disabled (no parity) Odd/Even (Parity Bit Even X must be Enabled, and does not apply to IrDA) Odd Auto Power Save Enabled X Disabled Note: If you are configuring the PB2 for a Bluetooth or 802.11 connection, make sure DIP switches 3, 4, and 5 are off. 26 PB2 Mobile Printer User's Guide