Intermec PB51 PB50 and PB51 Mobile Printer User Guide - Page 29
Standby, Setup, To load fanfold media
View all Intermec PB51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 1 - Using the Mobile Printer To load fanfold media 1 Make sure the printer is in Ready mode. • If the printer is off or in Standby mode, press the Standby button. • If the printer is on, press the soft key (usually the Setup button) to return to Ready mode. 2 Press the blue media cover release button until the cover releases. 3 Slide the two media supports apart. PB50 and PB51 Mobile Printer User Guide 17
Chapter 1 — Using the Mobile Printer
PB50 and PB51 Mobile Printer User Guide
17
To load fanfold media
1
Make sure the printer is in Ready mode.
•
If the printer is off or in Standby mode, press the
Standby
button.
•
If the printer is on, press the
soft key (usually the
Setup
button) to return to Ready mode.
2
Press the blue media cover release button until the cover releases.
3
Slide the two media supports apart.