Intermec PB51 PB50 and PB51 Mobile Printer User Guide - Page 49
Configuring Wireless Printing Using IPL, Understanding the 802.11 Radio Icons continued
View all Intermec PB51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 2 - Configuring the Mobile Printer Understanding the 802.11 Radio Icons (continued) Icon Description Weak signal Poor signal No signal Use the following sections to set most of your wireless communication settings. For help with additional commands and information, see either the Fingerprint Command Reference Manual or the IPL Command Reference Manual. You can download both documents from the Intermec website at www.intermec.com. Configuring Wireless Printing Using IPL Use the following procedures to configure your printer with IPL for wireless printing. To configure the printer to use WEP authentication 1 Send the following commands to login as an admin and set the SSID: .x,su -p pass admin ws,SSID,xxxxx where xxxxx can be from 0 to 32 ASCII characters, not including the double quote. Note: The default administrator password is "pass." If you have changed the password, use your password instead of "pass." 2 Send the following commands to configure the WEP keys. The following example sets WEP key 1 to 1234 and enables WEP key 1. ws,WEP1, 0x0001020304 ws,.WEP_KEY,1 3 Send the following command to activate the settings: ws,ACTIVE,1 PB50 and PB51 Mobile Printer User Guide 37