Invacare M91 Owners Manual - Page 31

Wheelchair, Operation

Get Invacare M91 PDF manuals and user guides View all Invacare M91 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

SECTION 5-WHEELCHAIR OPERATION SECTION 5-WHEELCHAIR OPERATION ƽ WARNING After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Set-up of the Electronic Control Unit is to be performed only by a qualified technician. The final adjustments of the controller may affect other activities of the wheelchair. Damage to the equipment could occur if improperly setup or adjusted. Operating the Wheelchair Turning the Power On/Off NOTE: For this procedure, refer to FIGURE 5.1. 1. To turn the power on, press the On/Off button. 2. Turning the power off, press the On/Off button. On/Off Button FIGURE 5.1 Turning the Power On/Off On/Off Button This button is located at the front of the joystick housing. It is used to turn the wheelchair on and off, to remove the joystick from sleep mode (if programmed) and to lock or unlock the joystick (if programmed). Using the Joystick to Drive the Wheelchair The joystick is located at the front of the joystick housing and provides smooth control of speed and direction. It is equipped with 360 degrees of mobility for ease of operation. The joystick is spring‐loaded, and automatically returns to the upright (neutral) position when released. Pushing the joystick in a given direction causes the wheelchair to move in that direction. Part No 1141450 31 Pronto® M91™ with SureStep®

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
SECTION 5—WHEELCHAIR OPERATION
Part No 1141450
31
Pronto® M91™ with SureStep®
SECTION 5—WHEELCHAIR
OPERATION
±
WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Set-up of the Electronic Control Unit is to be performed only by a qualified
technician. The final adjustments of the controller may affect other activities of the
wheelchair. Damage to the equipment could occur if improperly setup or adjusted.
Operating the Wheelchair
Turning the Power On/Off
NOTE: For this procedure, refer to FIGURE 5.1.
1.
To turn the power on, press the On/Off button.
2.
Turning the power off, press the On/Off button.
FIGURE 5.1
Turning the Power On/Off
On/Off Button
This button is located at the front of the joystick housing. It is used to turn the wheelchair
on and off, to remove the joystick from sleep mode (if programmed) and to lock or unlock
the joystick (if programmed).
Using the Joystick to Drive the Wheelchair
The joystick is located at the front of the joystick housing and provides smooth control of
speed and direction. It is equipped with 360 degrees of mobility for ease of operation. The
joystick is spring
‐
loaded, and automatically returns to the upright (neutral) position
when released. Pushing the joystick in a given direction causes the wheelchair to move in
that direction.
On/Off
Button