Invacare M91 Owners Manual - Page 55
Shroud/wheels
View all Invacare M91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
SECTION 10-SHROUD/WHEELS SECTION 10-SHROUD/WHEELS ƽ WARNING After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position. Replacing the Flat Free Tires on the Wheel Rim ƽ WARNING DO NOT attempt to replace flat free tires. This procedure MUST be performed by a qualified technician. NOTE: During initial use of the wheelchair, the user may experience flat spots on the wheels. Flat spots will vanish with continued use of the wheelchair. Removing/Installing the Shrouds NOTE: For this procedure, refer to FIGURE 10.1 on page 56. Removing 1. Remove the seat assembly. Refer to Removing/Installing the Seat Assembly on page 36. 2. Perform one of the following: • Top Shroud ‐ Lift up on rear edge of top shroud to release the four hook and loop strips that secure the top shroud to the base frame (Detail "A"). • Front Shroud ‐ Turn release knob ¼‐turn to the unlocked position and lift up to remove front shroud from base frame hooks (Detail "B"). Part No 1141450 55 Pronto® M91™ with SureStep®