Invacare M91 Owners Manual - Page 48
Raising/Lowering Elevating Front Riggings, Adjusting/Replacing Telescoping Front Rigging, Supports
View all Invacare M91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
SECTION 9-FRONT RIGGINGS Raising/Lowering Elevating Front Riggings NOTE: For this procedure, refer to FIGURE 9.6. 1. Perform one of the following: • Raising ‐ Pull back on the release lever and raise front rigging to the desired height. • Lowering ‐ Support front rigging with one hand away from the release lever. Push release lever downward with other hand. Release Lever FIGURE 9.6 Raising/Lowering Elevating Front Riggings Adjusting/Replacing Telescoping Front Rigging Supports NOTE: For this procedure, refer to FIGURE 9.7 on page 49. NOTE: When adjusting the telescoping front rigging support depth, ensure the footplate does not interfere with the caster wheel rotation. NOTE: Telescoping front rigging supports may be extended up to 2‐inches from the wheelchair frame in 1‐inch increments. This adjustment does not affect seat depth. NOTE: When installing the front riggings support tubes, ensure that the hinge pins are on the outside of the wheelchair facing away from the seat frame. 1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 36. 2. Remove the two socket bolts and locknuts that secure telescoping front rigging support to the seat frame. Pronto® M91™ with SureStep® 48 Part No 1141450