Invacare M91 Owners Manual - Page 37

Adjusting the Seat Height

Get Invacare M91 PDF manuals and user guides View all Invacare M91 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

SECTION 7-SEAT 2. Push down on the latch bar underneath front of seat. 3. Tilt front edge of seat up. 4. Slide the seat assembly forward to disengage seat from the pivot brackets located in the rear. Installing 1. Position the seat in the rear pivot brackets as shown in FIGURE 7.3. 2. Tilt front edge of seat down. 3. When seat is lowered, engage seat brackets into seat clevis pins. ƽ WARNING When reinstalling the seat verify that the seat brackets are engaged with the seat clevis pins by pulling up on the latch bar. 4. Pull up on latch bar to verify that brackets are engaged with seat clevis pins. 5. Connect the joystick. Refer to Disconnecting/Connecting the MK5 Joysticks on page 69. Rear Pivot Brackets Seat Clevis Pins Latch Bar (located under the front of the seat) FIGURE 7.3 Removing/Installing the Seat Assembly Adjusting the Seat Height NOTE: For this procedure, refer to FIGURE 7.4 on page 38. NOTE: The seat can be adjusted to five height positions in ½‐inch increments. 1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 36. 2. Remove the mounting screw and locknut that secures the adjustable height tube to the support tube. Part No 1141450 37 Pronto® M91™ with SureStep®

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
SECTION 7—SEAT
Part No 1141450
37
Pronto® M91™ with SureStep®
2.
Push down on the latch bar underneath front of seat.
3.
Tilt front edge of seat up.
4.
Slide the seat assembly forward to disengage seat from the pivot brackets located in
the rear.
Installing
1.
Position the seat in the rear pivot brackets as shown in FIGURE 7.3.
2.
Tilt front edge of seat down.
3.
When seat is lowered, engage seat brackets into seat clevis pins.
±
WARNING
When reinstalling the seat verify that the seat brackets are engaged with the seat
clevis pins by pulling up on the latch bar.
4.
Pull up on latch bar to verify that brackets are engaged with seat clevis pins.
5.
Connect the joystick. Refer to Disconnecting/Connecting the MK5 Joysticks
on
page 69.
FIGURE 7.3
Removing/Installing the Seat Assembly
Adjusting the Seat Height
NOTE: For this procedure, refer to FIGURE 7.4 on page 38.
NOTE: The seat can be adjusted to five height positions in ½
‐
inch increments.
1.
Remove the seat. Refer to Removing/Installing the Seat Assembly
on page 36.
2.
Remove the mounting screw and locknut that secures the adjustable height tube to the
support tube.
Latch Bar
(located under the front of the seat)
Rear Pivot
Brackets
Seat Clevis Pins