Invacare TRSX52FBP User Manual - Page 41
Replacing, Inside of, Chair
![]() |
View all Invacare TRSX52FBP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Replacing 1. Perform STEPS 1-2 above to flip the armrest back. 2. Remove hex screw, spacer and locknut securing the EXISTING armrest and insert to the wheelchair frame. 3. Remove the EXISTING armrest from frame. 4. Inspect rear tube of new armrest to ensure insert is properly installed with mounting holes aligned. 5. If not properly aligned, rotate the insert using a flat screwdriver to align the mounting holes. Armrest Release Button (Front or Back of the Armrest Front Tube) Armrest Front Tube Arm Socket Armrest Rear Tube Armrest Rear Tube Armrest Mounting Bracket Inside of Chair Hex Screw Nut Spacer FIGURE 1 Using or Replacing Flip-Back Armrest 6 ARMS Part No. 1110550 41 Invacare® Tracer® SX5 Wheelchair
![](/manual_guide/products/invacare-trsx58fbfp-user-manual-ae1e445/41.png)
6
ARMS
Part No. 1110550
41
InvacareĀ® TracerĀ® SX5 Wheelchair
Replacing
1.
Perform STEPS 1-2 above to flip the armrest back.
2.
Remove hex screw, spacer and locknut securing the EXISTING armrest and insert to the wheelchair frame.
3.
Remove the EXISTING armrest from frame.
4.
Inspect rear tube of new armrest to ensure insert is properly installed with mounting holes aligned.
5.
If not properly aligned, rotate the insert using a flat screwdriver to align the mounting holes.
FIGURE 1
Using or Replacing Flip-Back Armrest
Armrest Rear
Tube
Armrest Front
Tube
Armrest Release Button
(Front or Back of the
Armrest Front Tube)
Arm Socket
Hex Screw
Armrest Mounting Bracket
Armrest
Rear Tube
Nut
Spacer
Inside of
Chair