JVC AV-27F703 User Guide - Page 16

Connections Connecting to a DVD player AUDIO VIDEO S VIDEO R L MONO OVER INPUT 1 INPUT 2 INPUT 4 AUDIO COMPONENT VIDEO R L MONO COMPONENT VIDEO R L Y AUDIO OUT PB AV COMPULINK PR 75Ω (VHF / UHF) AUDIO OUT R L DVD PLAYER Y Green PB Blue PR Red OUT Illustration of AV-27F803 1) Connect Green cable out from DVD player "Y" Component Output, in to TV "Y" Component Input. 2) Connect Blue cable out from DVD player "PB" Component Output, in to TV "PB" Component Input. 3) Connect Red cable out from DVD Player "PR" Component Output, in to TV "PR" Component Input. 4) Connect White Audio cable out from DVD Left Audio Output, in to TV Left Audio Input 2. 5) Connect Red Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2. • Green, blue and red are the most common colors for DVD cables. Some models may vary colors, please consult the user's manual for your DVD Player for more information. • Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or Audio Output) before starting the other to avoid accidentally switching the cables. • See page 22 for instructions on programming your remote control to operate the basic functions of your DVD player. • AV-36F803, AV-32F803 & AV-27F803: You may also connect the DVD player to Input 4. • AV-36F703, AV-32F703, AV-27F703, AV-36F713, AV-32F713, and AV-27F713: If you use Input 2 (Component-In) for the DVD connection, you must set the V2 COMPONENT-IN on the initial Setup Menu to "YES" for proper display of the DVD signal. NOTE: Progressive DVD Players (players with an output scan of 31.5 KHz) will not work properly with this television. 16