JVC AV-27F703 User Guide - Page 18

Connections Connecting to JVC AV Compu Link JVC's AV Compu Link feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape* into your JVC-brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV- CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input • The AV Compu Link cable may be included with the JVC AV Compu Link accessory you wish to connect.If it is not, contact an authorized JVC Service Center for part # EWP 805-012. • AV Compu Link can only be used with JVC-brand products. AUDIO VIDEO S VIDEO R L MONO OVER INPUT 1 INPUT 2 INPUT 4 AUDIO COMPONENT VIDEO R L MONO COMPONENT VIDEO R L Y AUDIO OUT PB AV COMPULINK PR 75Ω (VHF / UHF) Illustration of AV-27F803 AV Compu Link III compatible VCR or DVD Player AV Compu Link III Swap To Connect: Plug one end of the AV Compu Link cable into the AV Compu Link input on your VCR, DVD, or other Compu Link device. Plug the other end of the AV Compu Link cable into the AV Compu Link input at the rear of the television. NOTES: • In order for the VCR playback to begin automatically, the recording tabs must be removed from the VHS tape. If the tab is in place, automatic switching will occur when you push the VCR's PLAY button. • The AV Compu Link cable has a male 3.5 mm (mono) plug on each end. • If your JVC-brand VCR has "A Code/B Code Remote Control Switching" (see your VCR's instruction book), using VCR A Code will switch the TV to input 1. • To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi's connection instructions for detailed connection information. • AV COMPU LINK III is compatible with select AV CompuLink receivers. 18